All guitars have a 24,72 inch scale, 21 nickel Silver Wagner frets, double truss rod and has a set neck construction. By default, the finish is nitro cellulose. Woodgrain filler are purely on a mineral basis. The used timber dries several years or decades. CTS pots, CRL or Switchcraft switches/Sockets. Paper and oil Condensers are used for the electrical system. Strap pins are Security lock compatible. All Booties BB’s are unique.

Standard model price: 4560€

Specs: (optional extra charge)

  • Body: Swietenia Mahagoni / Korina ( swamp ash, cedro and others)
  • Neck: Swietenia Mahagoni / Korina (curly/birdseye, cherry, cedro, rosewood and others)
  • Fretboard: Ebony / East Indian rosewood (Madagascar rosewood, curly / birdseye maple and others on request)
  • Bridge: Tune-O-Matic ABM Stop tail (Bigsby and others on request)
  • Tuners: Gotoh (others on request)
  • Pickup: Lollar (other on request)




Every single Tonfuchs guitar is a handmade product. This can take a bit longer and can sometimes be exhausting. So, if we go through the trouble and put so much effort and passion into each instrument, we do not want to spoil the result with inferior ingredients. That means no compromises in the woods, hardware, tuners, pickups, pots and capacitors that are used.

Wood: Our lumber storage is very extensive and is continuously being expanded. The amount of wood purchased each year is greater than the amount that leaves the workshop in the form of a finished guitar. We only use woods that have been aged and air-dried for several years. Among many other criteria, this is the most important. Under these circumstances, it may be that some wood types of a certain vintage are not infinitely available. Before we build an instrument with immature wood, we prefer not to build one at all.

Body: Because we optimize every guitar body to a fixed self-resonance. Our bodies vary from guitar to guitar in thickness as well as the back and arm-rest contours. The dimensions may deviate by 1-2 mm. This requires an analog way of working and is actually not attainable through industrial production methods. The widest possible range in overtones justifies this procedure.

Necks: The neck also has a self-resonance around the note E. This is possible through mass reduction and by sculpting the foot and neck collar to attain the most resonant heal possible. The collar also decouples the head plate from the vibrations of the neck. Our necks are preferably thick and strong. Shaped by a slight V in the lower regions and a C in the higher parts of the neck. Because everything is analogue and handmade, different neck profiles can be requested and are not a problem. The necks feature a double truss-rod which are adjustable in both directions. Bolt-on necks by default have a matt lacquered finish. For this a special cellulose mixture is used. Oil finished necks can be requested and are used to protect the surfaces of wood like for example Rosewood. For this we use cold pressed linseed oil.

Finish: The finish of a Tonfuchs guitar is not only nice to look at, but lets the instrument swing freely without dampening the sound. The pore filler used for coarsely porous woods such as Mahogany is on a mineral basis. The primer consists of a cellulose coating with a high concentration of solids. As final coat we also use a cellulose varnish. No acrylic, polyurethane, polyester or similar variations are ever used. With the cellulose varnish, after evaporation of the nitro thinner what remains on the instrument is what it already exists of anyway. Cellulose.

Basically, we offer three different finishes.

  • High Gloss Finish: All surfaces are flawless and are meticulously polished to a high-gloss.
  • Patina Finish: All of the hardware is slightly aged, the varnish has (on request) weather cracks and is not as glossy.
  • Splatter Finish: here all parts have been aged greatly and the instrument has greater signs of use.

Pickups: By default, our instruments use pickups from Jason Lollar and Nick Silver. Nowadays there are some really good pickup manufacturers whose products find their way into our instruments upon customer’s request. Nick and Jason are, in our opinion, two of the best in the world. And through years of close cooperation even custom-made variations according to our ideas are possible.

Hardware: As far as the choice of the bridges is concerned, we uncompromisingly focus on the best that we can buy. That’s why our standard hardware is from ABM and Rutters.
As far as machine heads are concerned, we rely on Gotoh.

For fret wire we trust in the material of the company Wagner, which consistently produce in Germany. The nickel silver is constant and especially high-quality alloy. Different profiles are available and can be individually fitted to the players wishes and preferences.

Electronics: On the electronic side, we use CTS Pots, CRL switches and Switchcraft sockets and switches. Wiring is done with Push-back-wire. All guitars have a treble bleed to avoid the loss of high frequencies when turning down the volume pot. For the Tone pot we usually use Paper and Oil capacitors. These are not the cheapest solutions, but life is just too short for a bad sound!